Yeastar Technology NeoGate Technical Information download pdf (Page 6)

NeoGate TE100 Administrator Guide

www.yeastar.com Page 6

2. System setup

2.1 Connection Drawing

2.2 Connecting Ethernet Line

TE100 provides two 10/100Mbps Ethernet ports with RJ45 interface and LED indicator.

Plug Ethernet line into TE100‟s Ethernet port, and then connect the other end of the

Ethernet line with a hub, switch, router, LAN or WAN. Once connected, check the status

of the LED indicator. A yellow LED indicates the port is in the connection process, and a

green LED indicates the port is properly connected.

2.3 Supplying Power

Please follow the steps below to connect the TE100 unit to a power outlet:

1. Connect the small end of the power cable to the power input port on the TE100

back panel, and plug the other end of the cable into a 100V~240V AC power

outlet.

2. Check the Power LED on the front panel. A solid green LED indicates that power is

being supplied correctly.

1 2 3 4 5 6 7 8 9 10 11 ... 40 41

No comments

Yeastar Technology NeoGate Technical Information Page 6